Proper Deadlift Grip: How to Correctly Grip the Bar for Deadlift

Most articles and explanation get proper grip for deadlift wrong. Dead wrong. Good one right? There are two opposite viewpoints: One says you should “grip the bar with the palm” and the other says you should “grip with your fingers.”

The first instruction confuses most trainees. How the heck do I grip with my palm? I use my fingers to grip things. Well, you are correct, sir. You can’t grip anything “with your palm,” as such. What people mean by this is that you should seat the bar in the palm of your hand first, between the thumb and forefinger, and then wrap the fingers around.

This palm gripping method will bunch and pinch the skin at the base of the metacarpophalangeal (base of fingers), pulling at the deadlift calluses if they are there and/or causing them to develop as ridges which are more easily torn off in the future. They may also press on the underlying tissue and bone while lifting, causing pain.

The second viewpoint says you should “grip with your fingers,” as if there was any other way. But what they mean is that you should hook the bar with your fingers and then squeeze it in. This, again, is a problem for calluses. It will allow the bar to pull at the skin at the base of the fingers, which results in ripped calluses for some lifters, some of the time. This also results in a less than secure grip and may actually cause large calluses to develop in places that are more uncomfortable, such as the proximal interphalangeal joints of the fingers.

Steps to Proper Deadlift Grip

The best way to grip the bar is actually what comes out of these two incorrect instructions. That is, those who give the first two methods are just repeating something they heard without understanding the steps involved and you will see how it can be misconstrued as “grip with your palm” or “with your fingers.” So here is how to do it:

1. Seat the bar on the part of your palm just underneath base of your fingers, the place where the biggest calluses tend to form. Press the skin against the bar firmly.

2. Maintain this contact with the bar while pushing your hand forward, away from you, so that the skin under your fingers is dragged slightly backward, toward the base of your palm. This will cause your hand to start to bend around the bar.

3. Keep pushing forward, maintaining pressure, and bring the palm of your hand onto the bar by placing the webbing between the thumb and index finger around the bar. So now, you are “palming” the bar. Your fingers should have naturally wrapped around the bar and your thumb should come to rest near, or over, your index finger, depending on your inclination.

4. Rotate the bar away from you until your wrist is straight.

Although I wrote this out in steps, it’s all done at the same time. If you can use it, gym chalk will help a great deal. Chalk does more than just provide more friction for you grip, it helps to facilitate getting a better grip in the first place. Although there are only subtle differences between this and the way most people would “naturally” grip the bar, the skin under the fingers is not snagged nearly as much. You may have a slight bit of discomfort in your hand, as you may be palming the bar correctly for the first time. Your hand will relax more over time and this should feel normal to you with practice.

Obviously, we are assuming that you do not think that the ‘correct’ way to grip the bar is to use a hook grip. The hook grip is an augmented grip and is not something most lifters would turn to right off the bat so this post assumes that you are gripping the bar according to most people’s natural inclination, which would be in a “power grip” where the thumb comes around the bar to buttress the grip. Using the method above for an alternated grip is a bit more tricky but the steps are the same.

Whether to use the hook grip to augment your grip, when needed, or to use an alternated grip is up to you to decide. This article, Hook Grip Versus Alternated Grip For Deadlifts, contains the most thorough breakdown of the issue that you will find, whether in a book or on the internet, and it gives my conclusion as to the best course of action.

Deadlift Bar Gripping Video

Deadlift Calluses: How to Deal With Them

If you do any sort of heavy lifting involving holding on to a barbell or any other implement, with enough frequency and volume, calluses will form. You can even get calluses from doing pull-ups. But the most frequent sources of calluses in the hand from lifting is from the deaflift. Deadlift calluses are the subject … Read more

Average Deadlift Weight: How Numbers Lie In Fitness Advertising and Info

This is not the first post where I talked about how numbers can easily impress and mislead us. I mentioned numbers and “proofiness” in The Data Dump in Fitness Information (Part of the book, The BS Vaccine For Fitness). Another closely related post is Strength Measurements Versus Assessments Our [western] culture is a bit obsessed … Read more

Strength Measurements Versus Assessments

what's your stats? Numbers or qualitative measurements are only one part of programming for strength

Quantitative Measurements and Quality Evaluations in Strength Training: The Difference Between Numbers and Performance Muscular strength can be measured in many different ways. In strength training, absent electronic equipment or mechanical strength gauges, strength is often measured via a person’s one rep maximum, the most weight the person can lift for one repetition of an exercise. … Read more

Cable Pull-Through (Hip Pull) Exercise

The benefits of the cable pull-through, sometimes called ‘hip pulls’, are many. One of the exercise’s main advantages is that it allows one to train the posterior chain, the glutes, hamstrings and hip adductors without the lower back having to support a big external load. This is one of the main advantages the cable pull through versus deadlifts.

Taking the load off the back is great if you have a lumbar injury and also makes pull-throughs a good teaching tool. You are able to focus on hip drive and not get the hips mixed up with the lower back which is a very common problem. Many beginning trainees have a very difficult time disassociating the lumbar from the hips. This is of primary importance. If you can’t tell whether a movement is initiated from the lumbar rather than the hips you will never learn proper hip drive. Hip drive is the foundation of most of our full body strength training movements. There may not be another “glute” movement as good as a pull-through and its value in teaching hip drive is unparalleled. Romanian deadlifts are good for this purpose but they don’t have the advantage of removing the load from the back.

Pull-throughs being more a hip “isolator” makes them valuable as a secondary or finishing movement. A scenario that would make Romanian deadlifts unproductive could be a perfect fit for the cable hip pull through. Low back fatigue is not as much a factor so the hips can be worked harder and longer.

However, as one maintains a good arched lumbar throughout the movement, local muscular endurance of the lower back is also trained.

Cable Pull-Through vs Deadlift

The pull-through is complementary to the deadlift. It resembles a deadlift enough that it is sometimes mistakenly called a cable deadlift.  While it is not a true deadlift, it is a very good exercise in its own right for those who do not want to deadlift.

If you do not want to deadlift but would like some of the benefits, the pull-through will do you right. As a supplemental exercise for ALL lifters, if you haven’t included this movement in your training regimen yet then start giving it some time now.

Yes, it looks funny to some people since you have to reach between your legs and then pull a cable handle up toward your groin. It certainly does not look at strange as hip thrusts done with a barbell and, quite frankly, it is a far superior exercise!

Equipment Needed for Pull-Through

Pull-throughs are done with a cable pulley apparatus with the cable set in the bottom position, such as you would use to do a low pulley row.

There are many affordable cable machines for home use. Although some are fancier than others, with more cable positions which allow for more exercises, even the most basic ones will allow you to do pull-throughs along with lat-pulldowns, low cable rows, etc. You can use these home machines extensively without having to purchase an expensive ‘home-gym’ cable setup. A simple unit like the XtremepowerUS LAT Machine sells for well under 200 dollars, while the Valor unit below, with more attachments and options, for goes for under $300.

Valor Fitness CB-12 Plate Loading Lat Pull Down Machine with Lower T-Bar

A rope handle (sometimes called a triceps rope) is usually used. However, a double-handled v-bar,  like this Double-D Row Handle may suffice for some trainees, or even a V-handle. I (Eric) actually prefer a double handle but most trainees seem to prefer the rope.

Pull-through Setup

1. With the cable handle end lying on the floor back up to it so that you can reach down between your legs and grasp it.

2. Walk out several paces until the slack is taken up on the cable and the weight is beginning to pull you back.

3. Take a wide enough stance to allow free movement (slightly wider than shoulder width or more). Set the shoulders back and the chest out.

Pull-through Execution:

1. Keep the chest high, the lumbar neutral (in its natural arch) and allow the weight to pull you back so that your hips come back. Allow the knees to bend slightly to about 20 to 30 degrees. Don’t think of going down but rather going back. Keep your hands in the same position. They are just there to hold onto the cable.

2. Stop when you reach your end range of motion. This is the point where you can travel back no further without your lumbar (and thoracic) beginning to round.

3. Return to the starting position by a powerful hip extension only. You should feel the contraction mainly in your glutes and second in your hamstrings. Remember that the hips do all the work. The hand do nothing but hold on.

4. Come all the way back up to the starting position and squeeze the glutes to ensure full lockout.

The following video is Craig Ballantyne performing the pull-through: